York Landscape Rakes

Model RI Rake

  • Distribute loose materials
  • Grade, break sod, mulch soil
  • Remove stones and debris
  • Spread Topsoil
  • Maintain dirt roads and driveways
  • Clean beaches

The Model RI combines many versatile features and adds the convenience of a Hydraulic Angle Option and Interchangeable Rake Sections. From the Standard 6', 7', and 8' Models to the 10' Heavy Duty Rake, this versatile rake gives you the right toll for the job!

Specs RI 6' RI 7' RI 8' RI 10' Heavy
Maximum Working Width 6' 7' 8' 10'
Minimum Working Width 5' 3" 6' 1" 7' 1" 8' 7"
No. of Rake Positions Manual Angle - 5, Hydraulic Angle - Infinite
Number of Teeth 36 42 48 44
Size of Teeth 5/16" x 1" x 28" 5/16" x 1-1/4" x 30"
Rake Teeth Material Heat Treated Alloy Steel Heat Treated Alloy Steel
Rake Tooth Spacing 1" 1" 1" 1½"
Tractor Hitch Required Cat I or II 3-point Cat I or II 3-point
Weight (Cat I) 441 lbs 467 lbs 493 lbs 578 lbs
Weight (Cat II) 461 lbs 487 lbs 513 lbs 598 lbs



Model SSF Skid Steer Rakes

  • Fully reversible rake section (Push or Pull)
  • Hydraulic angling (optional)
  • Float, independent of the skid steer
  • Tilt, to small degree for better raking action
  • Frame standard, for easy hookup and storage

York's improved Model SSF makes your Skid Steer an even more useful tool. The Model SSF was specially designed for Skid Steer Loaders. Order your rake with the appropriate plate for your skid steer, then, simply hook-up the SSF and you're ready. just a glance at the frame's mounting design will tell you...this is one tough rake!

Specs SSF 6' SSF 7' SSF 8'
Maximum Working Width 6' 7' 8'
Minimum Working Width 5' 3" 6' 1" 7' 1"
No. of Rake Positions Manual angle-5, Hydraulic angel-infinite
Number of Teeth 36 42 48
Size of Teeth 5/16" x 1" x 28"
Rake Teeth Material Heat Treated Alloy Steel
Rake Tooth Spacing 1" 1" 1"
Frame Structural steel, electrically welded
Mounting Plates Available for New Holland, Bobcat, Case,
Gehl, Mustang, Trak and Thomas. Others
available upon request.
Weight 647 lbs 673 lbs 699 lbs



SUV / Pick Up Rake

Now you can make your SUV or Pick Up even more versatile by equipping it with a York Rake. Maintaining that long gravel driveway or camp road just got a whole lot easier.

Max Working Width 8'
Min Working Width 7' 1"
Angle 30° L/R
Number of Teeth 35
Rake Tooth Spacing 1½"
Weight 400 lbs
Optional Caster Wheels 90 lbs

  • Rake mounts to an SUV or Pick Up using a 2" receiver hitch.
  • Raise and lower the rake from the comfort of your cab.
  • Control box connects easily to a 12V DC cigarette lighter or power supply port.
  • Integral storage stand to make connecting and disconnecting easier.
  • Controller and power cable easily disconnects from the rake for safe storage.
  • Rake teeth are heat-treated alloy spring steel rake teeth, 1¼" wide.
  • 1½" spacing between the teeth leaves desirable material behind.
  • Spring steel rake heads resist bending and have greater flexibility and durability.
  • Angles 30 degrees left or right to easily move material on or off road.
  • Optional caster wheels help regulate the rakes working depth.

*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Industrial Equipment
ABC Groff Main Page