Straight Snow Blades

Trip edge featuring four compression springs Adjustable cast skid shoes 5/8 in. x 8 in. reversible wear edge Heavy duty design allows full down pressure Oscillation allows edge to follow uneven surfaces Recommended for loaders with operating capacities greater than 1500 pounds Height extensions, curb guards and rubber edge also available 2 cylinder hydraulic angle with 1 9/16" diameter pivot pin 2" bore, 8 3/8" stroke cylinders with 1 1/4" rods and 1 1/4" cylinder pins.

Overall Blade Widths	86"	98"	110"
Blade Height	31.0"	31.0"	31.0"
Blade Angle	± 30°	± 30°	± 30°
Width @ Full Angle	74"	84"	95"
Blade Oscillation	± 4°	± 4°	± 4°
Moldboard Thickness	0.19"	0.19"	0.19"
Cutting Edge	5/8" x 8" Bolt on
Approx. Weight	1050 lbs	1110 lbs	1170 lbs

V-Blade Snow Blades

Hydraulic only control allows variable V, scoop, straight and angled positions Trip edge featuring four compression spring Adjustable cast skid shoes 5/8 in. x 8 in. reversible wear edge Reversible rubber center section Hydraulic only control eliminates any wiring and change over time between loaders Float link allows full blade contact in scoop and V positions, but can still apply full down pressure in straight and angled positions Oscillation allows edge to follow uneven surfaces Recommended for loaders with operating capacities greater than 1500 pounds Height extensions, curb guards and rubber edge also available

Overall Blade Widths	86"	98"	110"
Blade Height	31.0"	31.0"	31.0"
Blade Angle	± 30°	± 30°	± 30°
Width @ Full Angle	74"	84"	95"
Width @ Full Scoop	70"	81"	92"
Width @ Full V	76"	88"	99"
Blade Oscillation	± 4°	± 4°	± 4°
Float Link Angle	± 5°	± 5°	± 5°
Moldboard Thickness	0.19"	0.19"	0.19"
Cutting Edge	5/8" x 8" Bolt on
Center Edge	1" x 6.5" Rubber
Approx. Weight	1190 lbs	1250 lbs	1310 lbs

Snow Pusher

1.5" x 10" reversible replaceable rubber edges Floating side plates and frame link Heavy duty frame with oscillation Floating side plates and frame link along with oscillation helps edge stay in contact with surface being cleared Due to Snow Pusher design, edge never needs adjusting; only needs to be reversed or replaced Recommended for loaders with operating capacities greater than 1800 lbs.

Model	SWP84	SWP96	SWP108
Overall Pusher Width	90"	102"	114"
Pusher Depth	51.2"	51.2"	51.2"
Pusher Height	40.8"	40.8"	40.8"
Inside Pusher Width	86"	98"	110"
Inside Pusher Depth	38.3"	38.3"	38.3"
Pusher Oscillation	± 4°	± 4°	± 4°
Frame Link Float	3.0"	3.0"	3.0"
Cutting Edge	1½" x 10" Rubber
Approx. Weight	1285 lbs	1340 lbs	1395 lbs

*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.

Contact Ag Industrial for more product information. Phone: (717) 354-4191 Toll free: 1-800-346-8319 Fax: (717) 355-2272 Email: sales@abcgroff.com	Industrial Equipment
	Ag Industrial Main Page