Coneqtec Universal

APX Series Planers


The all new APX series of planers from Coneqtec/Universal are simply the easiest and most economical way to handle all your planing needs. The innovative Power Adjust Depth Control utilizes the hydraulics of the skid steer to control the depth, and the unique Roll out drum makes easy work of pic and drum service. Combined with a front down design that controls debris and stabilizes the planer when cutting and the exclusive open drum with a direct drive system, there is no other planer in the industry that comes close.

Model APX 300 APX 400 APX 450 APX 600
Cutting Width 12" 16" 18" 24"
Cutting Depth 6" 6" 6" 6"
Tilt Capability 15° 15° 15° 15°
Side Shift Travel 24" 24" 24" 24"
Weight 1200 lbs 1500 lbs 1600 lbs 1700 lbs
HP Requirement 18-45 30-70 35-70 45-70
Max Hydraulic Flow 33 gpm 50 gpm 50 gpm 50 gpm
Max Pressure 3500 psi 3500 psi 3500 psi 3500 psi



Rock Saws

Cutting Through

The Universal Rock Saw is available in three hardworking models to meet the needs of your jobsite. With the capability to cut rocks, concrete, asphalt and even rebar, a Universal Rock Saw is the answer to your cutting problems.

Model UR-450 UR-600
Depth of Cut 18" 24"
Width of Cut 2.5" 5" 2.5" 5"
Number of Pics 35 54 44 68
Side Shift Travel 22" 22"
Weight 1765 lbs 1875 lbs 2205 lbs 2415 lbs



Slot Cutter

The Coneqtec/Universal Slot Cutter with its innovative control design is ideal for pot holes, curb cutting, and repairing cracks in asphalt and concrete. Model SSG-7 and SSG-9 (skid-steer)are complete with a universal mounting plate, hydraulic side-shift and debris guard, pics, and hydraulic hoses minus couplers. These units must be run on hi-flo skidsteer.

Model Skid Steer Backhoe
SSG-7 SSG-9 BSG-7 BSG-9
Cutting Width 3" 3" 3" 3"
Cutting Depth 7" 9" 7" 9"
Side Shift Travel 24" 24" 24" 24"
Weight 900 lbs 1000 lbs 735 lbs 835 lbs
Hydraulic HP Required 35-80 hp 45-80 hp 35-80 hp 45-80 hp
Flow Requirement High Flow, 28 gpm High Flow, 28 gpm
# Teeth 20 20 20 20



Rotary Tiller

The Rotary Tiller offers the flexibility of being able to adjust the depth of cut utilizing the bucket function of the skid steer to adjust the depth of till.

Our high torque direct drive design eliminates wear problems associated with chain or belt drives by delivering power directly to the tiller shaft. Tilling can take place in both forward and reverse directions due to the motor that operates in both directions

Strong one piece welded chassis provides reliable service in any of our standard widths. All units are offset mounted allowing tillers to till past the edge of the tire.

Bi-directional rotation along with the double edge replaceable tines allow maximum flexibility and productivity. The bi-directional feature not only allow tilling in either a forward or rearward direction, but also allows a top cutting or undercutting action.

All units come matched to your skid steer's bucket coupling system and matched to the hydraulics of your system. Whether low flow or high flow, we have the configuration that you need.

Model RT1300 RT1500 RT1700 RT1800
Number of Tines 28 32 36 40
Min/Max gpm 18/40 18/40 25/40 25/40
Maximum Pressure 3300 psi 3300 psi 3300 psi 3300 psi
Working Depth 0-6" 0-6" 0-6" 0-6"
Working Width 52" 59" 66" 73"
Weight 835 lbs. 860 lbs. 1025 lbs. 1050 lbs.


*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Industrial Equipment
Ag Industrial Main Page