StumpBuster Stump Cutters

Introducing StumpBuster tree stump cutter from Shaver Manufacturing. It carves out a new niche for affordable, PTO-powered stump grinding.

Model SC-50
  Grind through even the toughest stumps with ease. the Shaver SC-50 is the most powerful stump cutter in the Shaver lineup. Mounted to the 3-point hitch of any 35 to 100 horsepower tractor, the unit 34" cutting wheel makes quick work of stumps, grinding them down to 12 inches below ground. The SC-50 - built for speed power and durability - features single direction cutting for longer bearing and gearbox life. The unit's new heavy-duty rubber shield protects the operator and deflects the debris into a clean mulch pile.

Model SC-25
  The powerful and durable PTO-driven StumpBuster is built to take on even the toughest stumps. Powered by a 15-35 ho tractor, the SC-25's 24" carbide-toothed cutting wheel can whittle away 24-inch-tall stumps in a matter of minutes. The unit's 980 rpm delivers high hub torque - enough to grind a 45-inch-diameter stump, into a hole 10 inches deep, in minutes. Repositioning the unit for another pass can also eliminate larger stumps. The StumpBuster's unique single-directional cutting design creates a more aggressive cutting pattern, quickly chewing through the stump. This design also improves bearing and gearbox life.

Models SC-50-H & SC-25-H
  Shaver's hydraulic-powered StumpBuster is the choice for large contractors, landscapers and maintenance departments. Mounted on a skid steer, these units are easy to maneuver into compact areas that are impossible to reach with other types of machines. These units feature the ideal combination of maneuverability, power, durability and simplicity.



Post Drivers

Shaver post drivers make "quick work" out of hard work

Fast and powerful, rugged and reliable, Shaver post drivers are the world's finest. They're built for heavier than the job requires. With only six moving parts, these machines perform year after year without a breakdown. You can choose from five models of Shaver post drivers. All models take just a few minutes to mount or detach. All work with any 3-point hitch, with or without Quick-Tach. Shaver post drivers can be mounted on tractors or skid steer loaders.

  • Easy Driving - Drives posts straight and true on almost any terrain.
  • Fast - Drives a four to five inch post in 10-15 seconds.
  • Powerful - Drives steel, wood, or even railroad tie.
  • Rugged and Reliable - Only 6 moving parts ensure long machine life.
  • Time Saving - No digging, no pointing, no tamping, no setting!
  • Five Models to Choose From - 30,000 to 100,000 lbs. of impact; front or rear mounting.
  • Low Cost - All these features yet affordably priced.

Model HD-8
"The Pounder"		 HD-10
"The Workhorse"		 HD-12H
"The Brute"
Impact at Full Stroke 30,000 lbs. 71,500 lbs. 100,000 lbs.
Effective Weight of
        Spring-Powered Hammer		 360 lbs. 725 lbs. 1100 lbs.
Operating Distance Above Ground 53-126" 53-128" 53-128"
Maximum Post Width 7-1/8" 8-3/4" 10-7/8"
Maximum Post Length 10' 10' 10'
No. of Block Studs 4 8 8
No. of Nyrim Blocks 4 8 8
Tilt w/Hydraulic Base Plate 15° front-back/15° side-side 20° front-back
25° side-side
Tilt w/Manual Base Plate 15° front-back/15° side-side N/A
Hitch Assembly Cat. I & II Cat. II & III Cat. II & III
Mounting front, rear or skid steer rear or skid steer
Hydaulic Requirements 3-4 gpm/1500 psi 12 gpm/1500 psi 15 gpm/2000 psi
Weight w/Hydraulic Base Plate 433 lbs. 661 lbs. 957 lbs.
Weight w/Manual Base Plate 385 lbs. 639 lbs. N/A


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Industrial Equipment
ABC Groff Main Page