New Holland Attachments

Tree Spade

FFC tree spade is perfect for digging, transplanting trees

Model Ball Size Weight
1836 36" 258 lbs
1840 40" 312 lbs
1842 42" 360 lbs
1844 44" 378 lbs
1848 48" 425 lbs

New Holland tree spades from FFC transplant trees and shrubs, pre-dig holes for planting and dig out stumps. They feature V-shaped construction and tapered edges to dig deep under roots. Three ball sizes range from 36 to 46 inches.

  • Completely transplant trees and shrubbery
  • Dig holes for incoming trees
  • Transplant pre-packaged trees
  • Place trees in new location
  • Easier to position plants
  • 3/8" plate with sharp, tapered edge
  • Place large decorative rocks and stones



Trencher

Bradco Trenchers offer tough, consistent digging power

New Holland Trenchers from Bradco feature a removable right auger and side-shifting capabilities so you can trench close to curbs and buildings. Two models—standard-flow and high-flow—can trench up to 5 feet deep and from 6 to 12 inches wide. The Model 625 standard-flow trencher offers 30-, 36-, 42- and 48-inch booms. The Model 650 high-flow trencher offers 30-, 36-, 38- and 60-inch trenching booms.

Compatibility
Model L140 L150 L160 L170 L180 L190
625 (Standard flow) X X X X X X
650 (High flow)     X X X X



Tracks

Grouser tracks let you go where others fear to tread

Plow through sand, mud or snow easily with New Holland over-the-tire tracks from Grouser. These tracks can be used on blacktop and other hard surfaces too. They're easy to put on and take off and continuously clean themselves. The soft track option reduces ground pressure and is gentle on hard surfaces.



Cold Planer

Remove pavement quickly with Alitec Cold Planer

New Holland cold planers from Alitec can move old asphalt and concrete, cut slots and plane frost heaves and expansion joints. These cold planers have a maximum cutting depth of 6 inches and are available in five widths. Hinged top covers mean easy access to the drum picks, and optional water kits are available.

Model CP12LFA CP16 CP18 CP24 CP30
  Low-Flow High-Flow High-Flow High-Flow High-Flow
Depth of Cut 0-5" 0-6" 0-6" 0-6" 0-6"
Width of Cut 12" 16" 18" 24" 30"
Number of Teeth 28 50 56 70 77
Hyd. Flow Required 15 gpm 28 gpm 25 gpm 28 gpm 30 gpm
Hyd. Pressure Required 2000 psi 2000 psi 2000 psi 2200 psi 2300 psi
Weight 1200 lbs 1750 lbs 2000 lbs 2300 lbs 2450 lbs


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319
Fax: (717) 355-2272
Email: sales@abcgroff.com
Industrial Equipment
ABC Groff Main Page