Kwik Pik Rockpickers

Never Pick Up Rocks By Hand Again!

  • For New Holland Bi-Directional Tractors
  • For Use in: Agriculture, Commercial, Industrial & Landscaping
  • Picks Up: Rocks, Rubble, Logs, Firewood, Bricks, Blocks and Other Debris
  • Front-mounted, Front-dumping
  • Dumps Rocks Directly Into Trucks Quickly & Safely
  • Requires Only 6 gpm Hydraulic Flow



Model 840
Capacity 1 yd³
Opening Width 84"
Opening Height 24"
Rock Sizes 2"-24" dia.
Weight 1426 lbs
Compatabilty New Holland
B-Directional
Kwik Pik Features
  • 2" to 24" Rock Sizes
  • 1" High Carbon Steel Tines
  • 360 degree Bi-directional Hydraulic Reel
  • # 60HD Roller Chain on Hydraulic Reel
  • 6 GPM Hydraulic Requirement
  • Front Dumping like a Conventional Bucket
  • 1-3/4" Reel Bearings
  • 1/4" Side Plates
  • 5/16" Back Plate
  • Grated Bottom with 2" Openings
  • Protective Screen for Operator Protection
  • Picks Rocks, Concrete, Rubble, Wood
  • Charcoal Grey Paint



Tractor Mounted Flail Mower

Tractor Flail Mower Cuts Grass or Weeds, and Cuts
up to ¾" Diameter Brush with the Same Knives

  • Destroys and Mulches Grass or Weeds and Cuts Brush up to ¾" in Diameter
  • Mower Leaves an Even Mat of Mulch for Faster Decomposition
  • Four Sizes to Choose From
  • Mowers work with as low as 14 hp. Note: 25 hp is recommended for tall weeds and intermittent brush.
  • Cuts Brush, Weeds or Grass with Same Knives
  • Skid-steer Mounted Models Also Available

Features

  • 10 gage Steel Body
  • Curved Hood for Improved Suction
  • 1¾" Rotor Bearings
  • Structural Steel Frame
  • Bearing Deflector Guard
  • Steel Deflector Shields
  • ¼" Steel Endplate
  • Heavy-duty Vented Belt Shield
  • Adjustable Skid Shoes
  • Rear Steel Deflector
  • 0 to 4½" inch Cutting Height
  • Offsetable Hitch
  • Line-shaft Support Bearing
  • Full-width Adjustable Gage Roller
  • 70 HP Gearbox
  • 1½" Roller Bearings
  • 540 RPM PTO
  • Roller Scraper
  • Spring-loaded Belt Tightener
  • Taper-lock Sheaves
  • 3-Groove Banded Belt

Model 48MH 60MH 72MH 90MH
Power Required 14-70 hp 20-70 hp 25-70 hp 30-70 hp
Width of Cut 48" 60" 72" 90"
Overall Width 60" 72" 84" 102"
Weight 650 lbs. 750 lbs. 850 lbs. 990 lbs.
Number of Knives (64) 32 sets (80) 40 sets (96) 48 sets (120) 60 sets


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Industrial Equipment
ABC Groff Main Page