Kwik Pik Rockpickers

Never Pick Up Rocks By Hand Again!

  • For Use in: Agriculture, Commercial, Industrial & Landscaping
  • Picks Up: Rocks, Rubble, Logs, Firewood, Bricks, Blocks and Other Debris
  • Three Sizes to Choose From: 48, 60 & 72 inch
  • Front-mounted, Front-dumping
  • Dumps Rocks Directly Into Trucks Quickly & Safely
  • Requires Only 6 gpm Hydraulic Flow

Kwik Pik Features
  • 2" to 24" Rock Sizes
  • 1" High Carbon Steel Tines
  • 360 degree Bi-directional Hydraulic Reel
  • # 60HD Roller Chain on Hydraulic Reel
  • 6 GPM Hydraulic Requirement
  • Front Dumping like a Conventional Bucket
  • 1-3/4" Reel Bearings
  • 3/16" Side Plates
  • Universal Skid-steer Mount
  • 1/4" Back Plate
  • Grated Bottom with 2" Openings
  • Protective Screen for Operator Protection
  • Picks Rocks, Concrete, Rubble, Wood
  • Charcoal Grey Paint

    • Model 480 600 720
    Capacity 1/2 yd³ 5/8 yd³ 3/4 yd³
    Opening Width 48" 60" 72"
    Opening Height 24" 24" 24"
    Rock Sizes 2"-24" dia. 2"-24" dia. 2"-24" dia.
    Weight 855 lbs 1005 lbs 1150 lbs
    Skid Steer Lift Capacity 1800 lbs 2250 lbs 2700 lbs



    Flail Mower for Skid Steers

    Destroys and Mulches Grass or Weeds and Cuts Brush up to ¾"

    Advantages

    • Front-mounted, hydrostatic driven
    • Cuts brush, weeds or grass with same knives
    • Leaves an even mat of mulch for faster decomposition
    • Three sizes to choose from
    • Mowers work with as little as 10 gpm
    • Tractor mounted models also available

    Features

    • Universal skid-steer mount
    • 10 gage steel body
    • Curved hood for improved suction
    • Heavy-duty vented belt shield
    • Directly coupled hydraulic motor
    • Full-width adjustable gage roller
    • Spring-loaded belt tightener
    • 1¾" rotor bearings
    • Bearing deflector guard
    • ¼" steel endplate
    • Adjustable skid shoes
    • Structural steel frame
    • 0-4½" cutting height
    • Steel deflector shields
    • Support bearing
    • No case drain required
    • All-welded hitch
    • Rear steel deflector
    • 1½" roller bearings
    • Roller scraper
    • Non-slip safety step
    • Taper-lock sheaves
    • 3-groove banded belt

    Model 60MH 72MH 90MH
    Width of Cut 60" 72" 90"
    Overall Width 72" 84" 102"
    Cutting Capacity ¾" ¾" ¾"
    Weight 750 lbs 850 lbs 990 lbs
    Number of Knives (80) 40 sets (96) 48 sets (120) 60 sets
    Hydraulic Requirements 10-54 gpm 13-54 gpm 21-54 gpm



    Skid Steer Snow Blowers

    • Enjoy Good Visibility and Ease of Operation Provided by Skid-steer Mounted Attachments
    • Make Use of Your Loader’s High Lift Capacity and Hydrostatic Drive to Handle the Deepest Snow
    • Standard-flow Snowblowers Work With as Little as 11 gpm to 20 gpm
    • High-flow Models are Available for Flows from 21 gpm to 60 gpm
    • Front-mounted, Skid-steer Hydrostatic Drive

    Features

    • All Electric Spout Controls Do Not Divert Oil from Main Drive, Maintaining Maximum Power
    • Optional Electric Deflector Control
    • Heavy-duty Spout and Deflector
    • Single Hydraulic-drive Motor Eliminates Back-pressure Between Motors Apparent in Two-motor Systems
    • Gear-driven Spout 270 Degree Rotation
    • Direct-coupled Single Hydraulic-drive Motor
    • 28" Cutting Height
    • 1" Auger Bearings
    • Adjustable, Floating Skid Shoes
    • No Case Drain Needed
    • Universal Skid-steer Mount
    • Quick-tach Mounting
    • 35 HP Oil Bath Gearbox

      Standard Flow High Flow
    Available Widths 48", 54", 60", 66", 72", 78"
    Fan Diameter 20" 24"
    Hydraulic Flow Required 11-20 gpm 21-60 gpm
    Pressure Range 2000-3500 psi 2000-5000 psi
    Weight 550-630 lbs 870-1015 lbs


    *Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
    Contact Ag Industrial for more product information.
    Phone: (717) 354-4191
    Toll free: 1-800-346-8319    		Fax: (717) 355-2272
    Email: sales@abcgroff.com
    		 Industrial Equipment
    Ag Industrial Main Page