Para-Level Skid Steer
Laser Grading Box


The Level Best Laser Grading Box consistently delivers accurately placed sub-base material in less time and at a lower cost than any other method.



Improve your quality
  The Level Best Laser Grading Box can reduce random cracking of concrete slabs. As the operator grades, the laser light from a rotating beacon is detected by the system's receiver and transmitted to the Level Best hydraulic controls. The grader box automatically lowers or raises to cut or fill as required. The finish grade elevation, consistently level within .25 inches, improves the quality of the finished surface by removing areas where random cracking can occur thereby increasing the slab's strength.
Decrease your costs
  Designed for one man operation, the Level Best Laser Grading Box replaces the traditional three person crew. An operator can quickly learn to use the system and finish grade up to 50,000 square feet in an eight hour day. Consistent and accurate grades improve material yield and avoids overages. Decrease your labor costs, material costs and your grading time with Level Best.
Contractor tested
  The systems are designed and built rugged to handle job site conditions, and have been successfully proven on more than 250,000,000 square feet of sub base material. Level Best Laser Grading Boxes are used in construction, recreational, turf and agricultural industries to achieve flat or sloped finished surfaces.

Model Box Width Required HP Box Capacity Weight
Front Rear
PL72 72" 42-60 hp 11.5 ft³ 7.0 ft³ 1530 lbs
PL84 84" 49-70 hp 13.4 ft³ 8.0 ft³ 1590 lbs
PL96 96" 56-80 hp 15.3 ft³ 9.0 ft³ 1650 lbs

Optional Equipment

Hydraulics
  • Digitally - Porportional Valve
  • Hoses & Fitiings
  • Solenoid Cable
  • Mast Pole
  • Hardware

Laser Alignment Controls
  • Control Panel
  • 360° Sensor
  • Power Cable
  • Sensor Cable
  • Remote Switch for in cab grade control

Apache Controls
  • Control Panel
  • 360° Sensor
  • Cable Kit (Power, Sensor, Solenoid & Remote Contorl)
Topcon Controls
  • Control Panel
  • 360° Sensor
  • Cable Kit (Power, Sensor, Solenoid & Remote Contorl)


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319
Fax: (717) 355-2272
Email: sales@abcgroff.com
Industrial Equipment
ABC Groff Main Page