"Pull-Type" & "Tapered Lug" Rollers

PT Rollers - The "Pull-Type" Roller is a heavy weight unit, suitable for rolling pastures and fields, or construction use. It can be pulled by compact tractors, lawn tractors, and even skid-steer loaders. Firm, smooth rolling is accomplished with the 24" diameter drum, which is 0.375" thick. The drum can be filled with sand or water for increased weight. Heavy duty 1 5/8" bearings provide for durability and easy pulling.

TL Rollers - The "Tapered Lug" Roller is ideal for packing sand or dirt in and around construction sites. The tapered lugs, in a chevron pattern, provide for a maximum percentage of compaction and smooth rolling, while reducing "chipping". Pulled from the tractor's 3-point hitch, the trunnion style hitch allows for tight turns while on uneven terrain.


Model PT-4 PT-5 PT-6 PT-8 TL-5
Working Width 47" 59" 71" 95" 59"
Overall Width 51.5" 63.5" 75.5" 99.5" 63.5"
Maximum Depth -- -- -- -- 3"
Transport Clearance -- -- -- -- 3.6"
Length x Height 68.6" x 24" 68.6" x 24" 109.5" x 33"
Roller Diameter 24" 24" 24" 24" 24"
No. of Lugs -- -- -- -- 48
Power Required 25-35 hp 35-50 hp 45-50 hp 35-50 hp 35-50 hp



Compact Grader

The Hoelscher GR compact grader gives versatility, productivity and added value to your small tractor. The pull-type design, with a trunnion style hitch attached to the tractor's 3-point arms, gives it exceptional maneuverability, improved productivity and reduced operator input.

  • Compact size allows for use in residential areas, or around construction sites. The unit's heavy weight, with an 18" high moldboard lets it do the tough jobs.
  • Massive 1" side plates on the frame and a heavy 3/8" thick moldboard provide for maximum penetration and rigidity. The king-pin is supported on top and bottom for increased life and more accurate cutting. The 1" thick rack provides large contact area of the lock pin, for positive blade settings, up to 45 degrees left or right.
  • On-the-go control of blade tilt lets you maintain the desired grade, up to 20 degrees up or down. Large tires provide stability for consistent grading.

Model GR-6 GR-8
Working Width 72" 96"
Overall Width 72" 96"
Maximum Depth 2.75" 2.75"
Transport Clearance 7.2" 7.2"
Length x Height 116.5" x 38.25" 116.5" x 38.25"
Cutting Edge Double bevel Double bevel
Power Required 25-35 hp 35-50 hp


*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Industrial Equipment
ABC Groff Main Page