- Model T-37 - This Model is available with the Clamps to Clamp-on many Standard and Extendable Dippersticks or with a Base for welding onto the Dipperstick. When not in use, the Backhoe Thumb folds into a locked position under the Dipperstick where it does not interfere with other uses of the Backhoe or the position required when loaded on a trailer for transport. When weight reduction is necessary, the entire Clamp-on Thumb can be removed in under 15 minutes or all of the Weld-on Thumb except the 28 lb. Base can be removed in about 10 minutes.
- Models T-18 & T-27 - These Models are made for Welding to the Dipperstick. When not in use the Backhoe Thumbs can be Stored as illustrated and will not interfere with other uses of the Backhoe or the position needed when loaded on a trailer for transport. If weight reduction is important, all parts except the lightweight Base can be removed in minutes.
|
