SmoothCutStump Grinders

PTO & Hydraulic Powered

Economical and Efficient PTO and Hydraulic powered stump grinders make stump removal fast and easy. Operator easily controls the stump grinder from the comfort of the tractor or skid steer seat.

  • Maneuverable - goes anywhere a tractor can; gets into tight places.
  • Higher productivity via it's unique cutting wheel design.
  • Cutting wheel design provides a smoother cutting action.
  • Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls.
  • Durable carbide-tipped cutting teeth are economical and easy to replace.
  • Harden bushings used in major pivot points for increased reliability.
  • Grease zerks provided at major pivot points for extended service life.
  • Standard needle valve for precise control of cutting feed rate for best cutting action.
  • SureFoot stabilizer bar provides solid footing during operation.
  • Rubber deflector helps control chips and debris during grinding.
  • Parking stand for easy storage.
  • Tractor models require two pair of remote hydraulic outlets
  • Hydraulic model has quick attach universal skid steer hitch system.
  • Skid steer unit has hydraulic solenoid valve requiring only one pair of remote hydraulic outlets.

Model SG-26 SG-36 SG-26H
Mount Cat I Cat I/II Skid Steer
Overall Length 75" 80" 72"
Driveline Type PTO/Series 5 PTO/Series 6 Hydraulic
PTO Speed 540 rpm 540 rpm 540 rpm
Driveline Protection Slip clutch Slip clutch System pressure
Gearbox Rating / Ratio 60 hp / 1:1.5 100 hp / 1:1.46 60 hp / 1:1.5
Cutting Wheel Construction Welded 2-piece laminated steel
Cutting Wheel thickness ¾" ¾" ¾"
Cutting Wheel diameter 26" 36" 26"
Cutting Wheel speed 810 rpm
5515 fpm		 788 rpm
7430 fpm		 810 rpm
5515 fpm
Number of Teeth 33 42 33
Cutting Teeth Construction Carbide steel bolt in
Cutting Height Above Ground 18" 18" 18"
Cutting Depth Below Ground 10" 15" 10"
Max. Cut Depth Per Pass 5" 8" 5"
Maximum Horizontal Cut 28" 33" 28"
Swing Arc 45° 45° 45°
Horsepower Requirement 22-50 hp 45-100 hp --
Hyd. Flow Requirement -- -- 15-25 gpm
Weight 660 lbs 880 lbs 757 lbs




Tine Grapple

Skid Steer Grapple (Low Profile Tine) Cylinder guards protect cylinders and components. 72", 78", 84" overall widths. Tines are spaced 7-1/2" . Complete with "connect under pressure" flat-faced couplers.




Scrap Bucket

Skid Steer Scrap Bucket (Low Profile Tine) Cylinder guards protect cylinders and components. 72", 78", 84" overall widths. Cutting edge is drilled to accept a replaceable beveled cutting edge. Complete with "connect under pressure" flat-faced couplers.




Tine Grapple Rake

Designed for 30 - 80 horsepower Front Loader or Skid Steer (utilizing the "Universal" Skid Steer attaching system) equipment. This 61.5-inch wide grapple allows the acreage owner unsurpassed versatility in raking, piling and loading brush and other hard to handle materials while leaving dirt behind.

Model ETG-5 ETG-5
Overall Width 61.5" 71.75"
Overall Depth 35.5" 35.5"
Overall Height 25.5" 25.5"
Tine Spacing 10" 10"
Grapple Opening 34" 34"
Number of Tines 7 8
Inside Depth 28.5" 28"
Upper Grapple Width 34" 34"
Pressure Rating 2500 psi 2500 psi
Horsepower Range 30-80 hp 30-80 hp
Weight 492 lbs 520 lbs
  • Designed for use on skid steers (and tractor front loaders) utilizing the "Universal" skid steer attaching system.
  • Ideal for raking, piling, and loading brush and other hard to handle materials while leaving dirt behind.
  • Unique upper grapple design provides clamping force to hold material securely
  • Greasable pivot points on upper grapple for long service life.
  • Low profile design offers great forward visibility for superior controp in close quarters and easy access to skid steer seat.
  • Shield plate on upper grapple provides protection for hydraulic cylinger.


*Note: Ag Industrial is an equipment dealer. We are NOT the Manufacturer.
Contact Ag Industrial for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@agindustrial.com
 Ag Equipment
Ag Industrial Main Page