Three Point Bale Spears

Worksaver has the attachment that is right for your hay handling needs. Our rear hitch mounted bale spears are designed, depending on model, to handle up to 3000 lb. bales. The line features tapered "forged" spring steel spears designed for hard center bales allowing easier spear penetration of and withdrawal from bale(s). A special tapered socket provides support for the spear. Each model is designed to mount to Cat.I/II (without quick-hitch) tractor hitches.


Model BSF-1523 BSF-122 BSFA-20 DBSF-30
Capacity 1800 lbs 2200 lbs 2000 lbs 3000 lbs
Spears, Main 1 1 1 2
Spears, Stabilizing 2 1 2 0
Weight 69 lbs 68 lbs 79 lbs 80 lbs

The DBSF-30 features two spears mounted side by side allowing it to pick up round bales keeping it oriented in its same position. model BSF-1525 incorporates a tapered "forged" spring steel 20" balance spear in addition to the 44" main spear. The BSFA-20 bale spear design incorporates a tapered forged spear that is adjustable (up/down) on the vertical mast of the attachment. This alows the operator to adjust the height, at which the spear penetrates the bale, increasing the versatility of the attachment.



Front Loader Bucket Bale Spears

Designed for use on Front Loader Buckets. These attachments allow the operator to leave the bucket installed when handling round bales. Ideal for the operator who is looking for an economical way to move a few round bales.

Model Type Capacity Length
BBSF-20 Bolt-on 2000 lbs 42"
CBSF-2000 Clamp-on 2000 lbs 42"
CBSF-2028 Clamp-on 3000 lbs 42"
T-2000 Clamp-on 2000 lbs 50¾"



Front Loader Bale Spears

Designed for use on Tractor Front Loaders. These attachments require that the front loader bucket be removed to install.

Model Bale Type Spears Capacity Length
RBSF-3333  Mid-Size Square 3 4000 lbs 26"
RBSF-3232  Large Square 3 3000 lbs 44"
RBSF-449  Large Rectangular 4 4000 lbs 44"
RBSF-432  Mid-Size Rectangular 4 3000 lbs 26"
LSFB-22  Round 1 2200 lbs 42"
LSFB-28  Round 2 3000 lbs 42"
UBSF-2018  Round 2 1800 lbs 44"
UBSF-2022  Round 2 2200 lbs 44"
UBSF-2030  Round 2 3000 lbs 44"



Bale Handlers

Specialty front loader hay handling attachments. These attachments require that the front loader bucket be removed to install unit.

Model Bale Type Bale Size Capacity Weight
UBH-2000 Round 3½' - 6' 2000 lbs 435 lbs
UBH-2072 Round 4' - 6' 2200 lbs 492 lbs
RBH-4000 Rectangular (2) 4' x 4' x 8'
(3) 3' x 3' x 8'		 4000 lbs 881 lbs

The UBH-2000 "Bale Hugger" and the UBH-2072 "Bale Hand" will gently handle large round or rectangular wrapped bales that weigh up to 2200 lbs. Both provide smooth curved clamping arms to prevent wrapped bale puncture. The UBH-2000 has adjustable main frame to allow for handling 3½ to 6 ft. bales. The UBH-2000 provides one stationary arm and one moveable arm to better handle stacked bales. Both clamping arms open and close simultaneously on the UBH-2072 to gently handle 4 to 6 ft. bales without tearing the plastic wrap.

The RBH-4000 Rectangular Bale Handler will handle either two 4' xs 4' x 8' bales or three 3' x 3' x 8' bales. Five 26" long forged spears are placed along the bottom of the unit. Six 18" long spears are supplied for the uprights. Each side features 5 hooks that are moveable by the operator. Unit is 79.50" wide and 80" high.



*Note: A.B.C. Groff is an equipment dealer. We are NOT the Manufacturer.
Contact A.B.C. Groff for more product information.
Phone: (717) 354-4191
Toll free: 1-800-346-8319		Fax: (717) 355-2272
Email: sales@abcgroff.com
 Ag Equipment
ABC Groff Main Page